Popcorn But Not Wine* - Helen's Closet Blackwood Cardigan

Pattern: Helen's Closet Blackwood Cardigan (2017)

Pattern Description: Fitted cardigan with extra long sleeves with a close fit around the neck and shoulders. It has minimal excess in the front and is meant to be worn open. View B ends at the hips, View A extends to mid-thigh and has patch pockets at hand level.

Pattern Sizing: Two size options: B-cup for sizes 0-22, and D-cup for sizes 12-34. I cut my size, starting at the top with a B-cup size 14 moving out to an 18 for the waist and hips.

Did it look like the photo or drawing on the pattern envelope once you were done sewing with it? Yes, exactly.

Were the instructions easy to follow? Yes, very much.

What did you particularly like or dislike about the pattern? The fit of this cardigan is extremely elegant and every version I've seen is gorgeous.

Fabric Used: 58" Sweater rib knit (50% Rayon, 30% Polyester, 20% Nylon) in Cream, Gutermann 100% polyester Sew-All thread in Eggshell, #22; and

 58" Ottoman rib knit (66% Cotton, 29% Polyester, 5% Spandex) in Root Beer, and Gutermann 100% polyester Sew-All thread in Chili Brown, #

Pattern alterations or any design changes you made: Choosing a pattern size was hard. My upper and lower half are different sizes, spanning across 2-sizes. However, with this pattern, it ranges four sizes from a D-cup size 12 to 18.

  

Would you sew it again? Would you recommend it to others? Yes, most definitely! I have another one in the queue but in a very different knit. This one was snug in the sleeves but I wonder if in a looser weave I should alter the pattern piece or not.

  

Conclusion: I absolutely love the finished garment. Though the sleeves are designed to be extra long I chose to shorten them. I took both cuffs off, removed an inch from the sleeves and half an inch from each cuff. I wear the cuffs folded half up so that shows how long they still are. This also helped loosen how tight they were at the wrist.

I also shout out about the fabric choice. I leave this cardigan at work where it's always cold. I could never have imagined how many times I arrive, add it to my daily outfit, and the color combination seems as if it was planned! I wish it didn't take so long to finish stuff because I need more of it! I may make a matching pencil skirt.

* Yes, A dated reference to the old tv show Scandal and Olivia Pope's wine cardigans.

The Costly Christmas Coat Caper

It's true I don't buy many clothes. I really try to make what I need. However, some things aren't worth the trouble OR would take me forever to get organized and make them the way I want. So I should buy them, right? Save myself the trouble and stress?

The last time I bought myself a coat was November 2002 for a week-long trip to Ireland. I did my research and acquired an amazing 3-in -1 Weather System parka from L.L. Bean where the components (quilted Primaloft-filled jacket and a red zip-on rain slicker with a detachable hood) could both fit into their own tiny pouches which made great travel pillows. This coat has been an extremely hard worker (along with my two wool coats for more formal looks) over the years but I've outgrown it. This of course is not unusual since it is sixteen years old and I am no longer a size small!

So this year, I would be traveling for the holidays and I really didn't want to bring my raggedy, ill-fitting parka, especially as it can no longer be zipped all the way down. Thank goodness for two-way zippers which allowed me to bypass it having to fit around my hips.

Time for a replacement! I loved that jacket and everything about it, it was warm, convertible, packable, the hood was removable, and it not only had interior pockets but also an exterior sleeve pocket for easy-to-reach cash and IDs. I used those traits as my key search words. If you don't know me in real life, you have no idea how much research I must do before I part with my money. So, I first started  the home of the original:

L.L. Bean Weather Challenge 3-in -1
$179 (from $229) in Deep Port/Raspberry

This sounded most like my jacket and I was willing to pay more at L.L. Bean if I could find something comparable in quality to the original, but that was not the case. The zippers were flimsy and inferior, enough so, that I checked the reviews, and they were the #1 complaint. I also was not happy with the thinner, wax-paper feel and sound of the exterior fabric. You would be heard coming and going.

L.L. Bean Winter Warmer Jacket
$129 in Cayenne

I was much happier with this one. I really loved the color! However, was looking for a convertible coat, which this wasn't (no zip-in insulation layer) and I had no idea how warm it would be, because it was more of a fleece lined shell with poly insulation only in the sleeves. But, oh that rich color...

Columbia Ten Falls Interchange Jacket
$150 in Nori

Again, the exterior fabric killed this one's chances. I also had to order an XL to fit my hips but then it was too bulky on my smaller top half.  The jacket was shapeless on me and with those inferior zippers, just not worth it.

Columbia Snow Eclipse Mid-insulated Jacket
$119.99 in Nori and Rich Wine

This one didn't catch my eye on their website but it did when I saw it in Dick's Sporting Goods. The fit was good, so was the color, and the insulation was actually faux goose down. However, at the time I was not a fan of the faux fur trim. (Why is every woman's coat straight out of Dr. Zhivago this year?)

I discovered the label Free Country at J.C. Penny's because they were the the first 3-in -1/convertible coats I had seen in retail. The details were so well done; the zippers seemed stable and the zipper pulls of the zip-in jacket were covered by soft fabric triangle tabs that sheltered the pulls from view and contact with your inner garments. The gathered cuffs of the inner jacket kept heat from escaping and the exterior fabric seemed capable of repelling snow and rainwater. The only thing wrong...I didn't like the styles offered in the store. So off I went to their website for more choices.

Free Country Zephyr 3-in -1 Systems
$69.99 (from $180) in Black

Wasn't a fan of this on the website because of the color blocking and patterned fabric but tried it anyway. No go, not my style.

Free Country Trailblazing 3-in -1 Systems
$89.99 (from $180) in Garnet

I wanted red so I ordered this one but I still wasn't happy, so this one was also returned.

Free Country Nebula waterproof 3-in-1 System
$54.99 (from $180) in Royal Moth

This was the convertible/3-in-1system/interchange jacket I was looking for! I might have preferred it in red, purple, or green and a little bit longer but it was on sale for $55 and the inner jacket is a dark Mulberry color! It has the exterior sleeve zipper pocket, inner pockets, detachable hood, and the fabric of the quilted interior jacket feels like a cloud. Update: Just wore it for Christmas in New Jersey and it was warm enough for this mild winter.

Free Country Virtue Down Parka
$89.99 (from $220) in Red

So far this year, this jacket hasn't had any use, with a 50°F Christmas but come late January and February, and it will come in handy. This one is durable canvas on the outside with a three-quarters-length storm placket inside. My favorite features are the array of exterior pockets; zippered side entry hip pockets are placed directly on top of buttoned top-entry pockets. Another pair of side seam pockets are several inches above them in perfect position for warming the ribs. The best thing of all? That fur trim is removable!

St John's Bay Heavyweight Puffer jacket
$90 (from $180) in Rich Teal

I was immediately drawn to the one because of it's slightly iridescent teal color. Yes, I know it has fur trim on the collar but for that color, I can live with that. It will just be my more dressy coat.  However, even though "heavyweight" is part of it's description, it is a lightweight coat in weight and heat retention so this coat was more of a delicious treat for myself. The very best thing about this coat is that the back waist section is shirred with elastic, adding some much needed shaping.

So, almost all of the coats above were ordered and then returned. The winners were the last three above. It's pretty obvious I will be going to Free Country first for my next coat purchase. Since it probably won't be until 2034, I hope they'll still be in business...

Dotty Duster Coat - New Look 6656

Pattern: New Look 6656 (2006)

Pattern Description: Collar-less, unlined, above-knee duster jacket.

Pattern Sizing: Size A (10-12-14-16-18-20-22) I made view A in a size 14 at the shoulders and bust increasing to a 16 at waist and 18 below.

Did it look like the photo/drawing on the pattern envelope once you were done sewing it? Yes, yes it did!

Were the instructions easy to follow? Extremely, it had a very simple construction, with no tricky or difficult steps involved.

What did you particularly like or dislike about the pattern? What I appreciated the most was the inclusion of a center back seam for shaping. Also the waist shaping of the side seams match my body type (10" difference between waist and hips) although it might be too much of a difference for a slimmer-hipped woman.

Fabric Used: 2 yards of black, white, and gray polka dot print moleskin from Jo-Ann Fabrics (on sale for $7.49 per yard, orig $29.98), Pellon SK135 Sheer-Knit fusible interfacing, 2 packages Wrights 1/4" double fold bias tape in Black, vintage Wright's Trims non-shrink seam binding in Navy #55, and Gutermann 100% polyester thread in Black #10.

Pattern Alterations or any design changes you made?: I first made some changes to the paper pattern: I cut View A out in size 14 at the shoulders moving out to a size 18 at hips.

Comparing the pattern pieces, New Look 6656 had a strange drafted protrusion at the upper back that I cut off leaving the back straight above the curved "swayback" shaping. I found the back neckline uncomfortably high on my neck so ended up cutting both necklines and their facings in a size 12.

The sleeves for this design were meant to be cropped or extended with a contrast cuff. Instead, I combined the two pattern pieces and cut my sleeves out at full length.

Construction: 

First thing, first, I discovered when I checked and straightened the fabric grain by pulling a thread that the print was slightly off grain.

 

 Correct => Incorrect

Second, when finally confronted with cutting out this fabric I realized that I had misrepresented the fabric's orientation to myself all these years. I had imagined a coat with vertical lines when in fact the fabric has the dots running horizontally! Which now meant that I should really try to match the seams, right? That resulted in me spending a lot of time lining up, marking, and cutting out all the pieces in a single layer.

I then attempted to match the side seams, though the bust darts made it more complicated. The moleskin was a but stretchy which made matching a little difficult as I had to keep tugging the rows into place. Eventually, I was able to have white rows of dots line up across the seams; however, if you look close, you can see that the two adjacent rows of gray dots weren't matched correctly and different shades of gray were lined up! Luckily, the most important seam, the back seam, came out perfectly.

However, I shouldn't have had that problem though because the fabric was a bit translucent making the matching pretty easy.  I was able to lay a piece atop another piece and see the design on both. Oh, wait... I could see the design/shapes but not differentiate between the very close shades of gray. Okay, I feel better now.

Later on, I also added stay tape to the shoulder seams to combat the possibility of them stretching. It just happened that I received this vintage seam binding in navy (from a giveaway) that I could use for this "vintage" project.

Turning out the squared lapels was very important to this jacket looking great. Therefore, I trimmed the seam allowance to eliminate bulk. Of course, later I remembered I had tips and tutorials saved on the best ways to do this. Ugh!

In fact, right after this jacket was completed I saw this very promising technique on page 73 of the February/March 2017 issue of Threads magazine.

I finished the raw edges on the facing by turning under and stitching. At this point, the fabric had revealed that it frayed extensively and since this coat would not be lined I wanted to finish as nearly as possible the other raw edges that would be subject to regular friction.

Side A or B?

I had the choice of going with my typical finish of simply turning the seam allowance under or I could be daring and try something more decorative like a bound edge or a Hong Kong finish.

Because of the graphic look of the jacket and how precious this project had become over time I chose to use bias tape to bind the exposed seam allowances.

On the back, I bound the seams separately so they could lay open and flat; but I chose to bind the sides and sleeves together as one flat seam. I am so happy with how this turned out.

I'm extremely proud of my sleeve caps. The ease allowed in the pattern was perfect, I was able to achieve a smooth cap but it was not effortless. I first machine basted the sleeves in but my turquoise staystitching (absolutely necessary!) showed that they didn't go in exactly on the seam line. I then unpicked the seam and basted them in by hand and stitched directly over those stitches. Voila!

That success was followed by more bound seams for the underarm and shoulder seams before attempting the most difficult, the binding of the armscye. Luckily, that went well too and I am in love with all of my bound seams and how professional the whole thing looks!

Would you sew it again? Would you recommend it to others?  Yes, I would. The alterations I had to make were needed for my particular body and didn't seem too bad to me. The difference between my waist and hips was perfectly accommodated for in the pattern. Otherwise, the construction is perfect for a beginner. I also love the slight bell shape of the sleeves.

Images: Calvin Klein and @meccok on instagram

J. Jill duster

Conclusion: I have had a few inspiration pics for this type of coat over the years and I have finally made one for myself. The J. Jill pic above is from their 2010 catalog and is the original inspiration for this duster and shows how diligent I was in getting all the details right despite going with a woven versus their knit version.

I think this will be a great addition to my wardrobe, easily able to transform a simple top and bottom into a chic ensemble. I hope to use this pattern many times and definitely want to make an evening coat out of a patterned satin brocade.

Duster History Posts:

The original idea from 2010!!

The first try

The second try